How-To Posts
November 5th, 2018
Scratches on your vehicle’s paint can be frustrating to get out. But with CutMax from Sonax...
November 2nd, 2018
Often when working on old cars, the replacement parts you need are hard to find, not made anymore...
November 1st, 2018
Whether you’re setting up suspension or fabricating something for your rig, a MIG welder is...
October 31st, 2018
A very popular modification is adjusting ride height. But you still have a few things to do after...
October 30th, 2018
Fluids are crucial to your vehicle maintenance. Specifically when it comes to your engine. So it&...
October 29th, 2018
Without an oil pump, pressurized lubrication to the bearings, timing set and rest of the valvetra...
October 23rd, 2018
On previous episodes we discussed parts verification, specifically when it comes camshafts. When ...
October 16th, 2018
Vehicle testing and development when it comes to the engine is all about the chassis dyno. So Mik...
October 11th, 2018
The guys from Coats where nice enough to come demo the new equipment we got from them so Jeremy a...
October 9th, 2018
You can’t beat looking down a low panel and seeing that perfect reflection. But on vehicles...
October 5th, 2018
In the shops, the guys verify parts for each and every project. Whether you’re building som...
October 4th, 2018
The 6.1-liter Hemi was made from 2006 – 2011 and was made available in several Mopar produc...
October 2nd, 2018
When building an off-road rig, in order to pass tech, you often can’t use the OEM fuel tank...
October 1st, 2018
We paint a lot here in the shops, and although we try to always pass on the tech and tips, someti...
September 28th, 2018
A Triple Threat Car is one that excels on the road course, autocross course, and drag strip. This...
September 25th, 2018
When it comes to bead rollers, you have different options such as variable speed motors or cranks...
July 30th, 2018
Who doesn’t love more power? But when it comes to adding that extra power, you may not alwa...
July 26th, 2018
Detroit Muscle co-host, Marc Christ, takes you through how to mate an engine with a transmission....
July 26th, 2018
Regular maintenance on your vehicle helps to keep it running well and longer. And sometimes greas...
July 18th, 2018
If you’re doing fabrication, chances are you’ll need to do some cutting. And Sawblade...
